hi i have some questions about yapb bots

[chelseafc0512]

hi i have some questions
1 . is there a command to mark a waypoint and make bot go to this waypoint ?
(use for testing the waypoint mesh )
2 . when converting podbot waypoint to yapb bot waypoint, is there any change in waypoint that makes waypoint different and makes the bot gets stuck ? (i convert by using PODBot-MM -> Standard PB waypoint Converter )
http://filebase.bots-united.com/inde...ct=view&id=391)

[Whistler]

1. IIRC - "CT/T Important" waypoint and "Map Goal" waypoint
2. the only change is the camping angles, besides that, no

[chelseafc0512]

thank you,whistler
1. after converting waypoint ,all camping angles will be wrong and i need to reedit camping angles ,right ? we can see the camping angles right or not by seeing the 2 red lines in camping waypoint ,right?
is there a command to teleport we to all camping waypoints for easier to reedit?
is there any program to convert yapb bot waypoint to podbot waypoint ?
2. what do you means "IIRC" ?
3. does you mean we should set the waypoint we want to test to "goal" or "t/ct important " ?
4. is there anyway to test the waypoint such as wp debug goal (like podbot) ,so that makes bot not run away and goes to the waypoint we test immediately ?
5.is there anyway to set flags of other waypoint ,such as camping,ladder,goal ....... to "normal" ?
6.why when creating ladder waypoint with long ladder ,we must place a additional Ladder waypoints between the bottom and the top end ?
is it needed if we can connect the bottom to the top ladder waypoint by cache waypoint ?

[chelseafc0512]

i don't know why i can't edit the previous post so i add post here ,sorry :d
7. is there away to save waypoint with smaller size without losing any data?
in cs:cz when save navigation file (nav),the experience people always save first after editing ,restart to reload nav file ,then switch to windows ,go to folder and delete .nav file ,then switch back to the game and save nav file,the navsize will be reduce because of all unused data has been left.it is very useful
8. with podbot and yapbbot waypoint, can we do it with no errors ?
which is the different beetween podbot ,e[podbot] and yapb bot waypoint file ? i only see yapb bot waypoint to podbot waypoint converter,
if we use the waypoint (which i have edited with yapb bot ) - for podbot and e[podbot],is there any errors and cause bots get stuck ?
9.do you know which will affect to the bot-cpu usage ? the amount of waypoints,the length of the connect path ? the amount of connections ?and how to know the cpu usage of the bots ?
10. is there a cvar like that with yapb bot? i think it is very useful, i see yapb bot camping to the end round ,i think it is wasted time
" Set the below value to delay in seconds the bot may stay camping in one place before going somewhere else"
pb_maxcamptime 20 (with pobot)
sorry many questions

[chelseafc0512]

. i read the thread http://forums.bots-united.com/archiv...hp/t-7477.html
and found that
Quote:
Originally Posted by forOne
thanks, i found the commands but this information was not in the readme file from the version 2.55, at least i have not found it. but the information was in the readme file of the YaPB (Legacy)-Version (old version of yapb)

i have downloaded YaPB (Legacy)-Version (old version of yapb) at http://filebase.bots-united.com/inde...ct=view&id=198 but the font of the text file corrupt so i can't read it, please send me the readme file that contain full of yapb bot commands . it helps me very much ,thank you

[chelseafc0512]

the old yapb bot have these commands ,but i can't find in yapb 2
i want to disable bot collecting experience to increase game performance
, please tell me if yapb 2 has these command :
yapb_useexp <1|0> - Turn this on/off to allow the Bots collecting
// Turn this on to save the .pxp files automatically
yapb_autosaveexp 1
// experience about the map they're playing
//
// yapb_autosaveexp <1|0> - Turn this off to prevent saving the .pxp files