.:: Bots United ::.  
filebase forums discord server github wiki web
cubebot epodbot fritzbot gravebot grogbot hpbbot ivpbot jkbotti joebot
meanmod podbotmm racc rcbot realbot sandbot shrikebot soulfathermaps yapb

Go Back   .:: Bots United ::. > Enhancement Workshop > (mEAn) Bot.Admin Mod / ServerLoader > (mEAn) Bot.Admin Mod Help
(mEAn) Bot.Admin Mod Help Need Help? Ask questions in here

Reply
 
Thread Tools
I dont have access?
Old
  (#1)
xx8aznflipboi5xx
Member
 
Status: Offline
Posts: 12
Join Date: Feb 2006
Default I dont have access? - 27-02-2006

i installed mean mod and everything works fine but the adding my self as admin. everytime i try to go to console and type something like m_botmode or anything the admin just can do it always says "(mEAn) You dont have access to this command." ive followed the directions on the adminaccess.txt and followed the setpawwsords.txt ive also edited me user.cfg here is what it looks like

;
; Security File
;
; Access Codes:
; o = Server Operator
; 1 = Admin Level 1
; 2 = Admin Level 2
; c = clan member
; g = guest access
;
; Any combination of WonID, Username and password may be
; used for authentication. Empty items are represented as
; two double quotes (""). Empty items will not be used
; during authentication and act as wild cards. At least
; one security item must always be specified.
;
; Examples:
;
; To allow authentication by WonID only, specify the
; WonID and leave Username and password empty.
; Example: "12323" "" "" "c"
;
; To allow authentication by WonID and Password, specify
; the WonID and the password, leaving WonID and Username empty
; Example: "12323" "" "mypassword" "1"
;
; For the higest security, specify all three security items
; Example: "12323" "ServerOpName" "mypassword" "o"
;
; NOTE: The order in which you add security access lines
; is important. You can allow access by multiple means,
; such as ( WonId and Password ) OR ( Username and Password )
;
; Example:
; "12323" "" "mypassword" "2"
; "" "AdminName" "mypassword" "2"
;
; In the above example, whenever a user connects, an attempt
; to match by WonId and Password will be done first, if that
; fails, a match by Username and Password will be done next,
; and so on, until there is nothing left to match on. The
; first match found will always be used for authentication.
;
; Example for allowing graduated access for the same user:
; WonID Username Password Access
; ======= ============================= ======== ======
; - WonID and Username and Password must all match to gain access
; This is the highest level of security.
; "223234" "username" "password" "o1c"
; if above fails then ...
; - WonID and Password must both match to gain access
; "223234" "" "password" " 1c"
; if above fails then ...
; - WonID and Username must both match to gain access
; "223234" "username" "" " 2c"
; if above fails then ...
; - Username and Password must both match to gain access
; "" "username" "password" " 2c"
; if above fails then ...
; - Only WonID must match to gain access
; "223234" "" "" " c"
; if above fails then ...
; - Only Password must match to gain access
; "" "" "password" " c"
; Place your authentication information below:
;
; WonID Username Password Access
; ==== ============ ======== ======
; "9996222" "xx8aznflipboi5xx" "blubber" "o1c"
; "9996222" "" "blubber" "1c"
; "9996222" "xx8aznlfipboi5xx" "" "2c"
; "" "xx8aznflipboi5xx" "blubber" "2c"
; "9996222" "" "" "c"
; "" "" "blubber" "c"



please i need help fast thanks

Last edited by xx8aznflipboi5xx; 27-02-2006 at 10:24..
  
Reply With Quote
Re: I dont have access?
Old
  (#2)
woot woot
Member
 
Status: Offline
Posts: 100
Join Date: Aug 2005
Default Re: I dont have access? - 27-02-2006

Take the semi-colons [;] out that is in front of your admins. -.-

Btw, you don't need that much information for access. One is enough, preferrably the first with the flags "o1c".
  
Reply With Quote
Re: I dont have access?
Old
  (#3)
xx8aznflipboi5xx
Member
 
Status: Offline
Posts: 12
Join Date: Feb 2006
Default Re: I dont have access? - 28-02-2006

Hi again the help was useful and is now working but i have another problem i deleted PODbot folder from the mean folder and replaced it with EPODbot and when ever i try to add a bot like puttin gin m_addbot it just says (mEAn) Cannot add bot. The bot system is either not loaded or supported please need help again thanks

Last edited by xx8aznflipboi5xx; 28-02-2006 at 03:20..
  
Reply With Quote
Re: I dont have access?
Old
  (#4)
botmeister
Ex-Council Member
 
botmeister's Avatar
 
Status: Offline
Posts: 1,090
Join Date: Nov 2003
Location: Canada
Default Re: I dont have access? - 16-03-2006

EPODBot is not supported. I tried adding support but the dedicated server command to add bots failed and locked up the server.


Maker of the (mEAn) Bot.Admin Manager

"In theory, there is no difference between theory and practice. But, in practice, there is." - Jan L.A. van de Snepscheut
  
Reply With Quote
Re: I dont have access?
Old
  (#5)
The Storm
Council Member / E[POD]bot developer
 
The Storm's Avatar
 
Status: Offline
Posts: 1,618
Join Date: Jul 2004
Location: Bulgaria
Default Re: I dont have access? - 23-10-2006

The server commands are fixed in v5.3. You can try again.
  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com