Hi,
i have Podbot V3 19d with the new Gungame 2.10. My problem is that the server often crahes. On Mapchange, if human players connect or sometimes during a map.
I have tryed some things for my own. For example i tryed the V2 46d, it works fine with AMX 1.76d and a Vampire Plugin but also crahes with the Gungame.
Gungame without the Bots or the Bots without Gungame works fine.
Here my configurations:
Code:
description stat pend file vers src load unlod
[ 1] AMX Mod X RUN - amxmodx_mm_i386. v1.8.0.3 ini Start ANY
[ 2] POD-Bot mm RUN - podbot_mm_i386.s vR2b46d ini Chlvl ANY
[ 3] MySQL RUN - mysql_amxx_i386. v1.8.0.3 pl1 ANY ANY
[ 4] CStrike RUN - cstrike_amxx_i38 v1.8.0.3 pl1 ANY ANY
[ 5] Fun RUN - fun_amxx_i386.so v1.8.0.3 pl1 ANY ANY
[ 6] Engine RUN - engine_amxx_i386 v1.8.0.3 pl1 ANY ANY
[ 7] FakeMeta RUN - fakemeta_amxx_i3 v1.8.0.3 pl1 ANY ANY
[ 8] CSX RUN - csx_amxx_i386.so v1.8.0.3 pl1 ANY ANY
[ 9] Ham Sandwich RUN - hamsandwich_amxx v1.8.0.3 pl1 ANY ANY
(This was from a test with the V2b46d)
This is my pb cfg (for the V3)
Code:
# This sets the Waypoint Folder (in the POD-Bot Directory)
# for loading/saving waypoints. Don't use a trailing backslash or spaces.
# This doesn't work for the first game you create (default is wptdefault).
# But when creating for the second time (or loading with newmap) this
# directory will be used.
pb_wptfolder wptdefault
# Set the value to 1 to turn on welcome messages at start the game
pb_welcomemsgs 0
# Use this to turn on/off the Speech Synthesis
pb_usespeech 0
# These 2 lines below supports a minimum and maximum number
# of bots running on a server. Bots will be added to the server
# until the total number of players (bots and humans) reaches the
# max_bots value. Each time a new player joins the server, a bot will be
# kicked from the server unless there are only min_bots number of bots
# currently on the server. After players disconnect from the server, bots
# will be automatically added back to the server until the total number
# of players reaches max_bots again. You should make max_bots be AT LEAST
# one less than the maxplayers value (otherwise no one will be able to join
# your server).
# These 2 cvars below are limits for the function pb fillserver
# and pb removebots.
# You can stop this function by writing pb_maxbots = 0.
# Ths function is also not working in the case if pb_bot_quota_match
# is grater than 0 (in that case amount of bots follow the number
# humans * pb_bot_quota_match - of course in the min/maxbots limit).
pb_minbots 10
pb_maxbots 10
pb_bot_quota_match 2
# Changing the setting below forces bots joining to certain team.
# Useful if You want to have always bots in one team against humans.
# Argument values: "ANY", "T", "CT"
pb_bot_join_team "ANY"
# Changing the setting below forces bots using the specyfied skin - the same
# for all bots from one team - regardless of pb add or pb fillserver
# parameters.
# Useful if You want to have always bots in one team with the same skin.
# Argument values: 1,2,3,4 - they are foreced skins, 5 - default - no forcing
pb_skin 5
# These Settings below specify the Rate (in Seconds) of updating
# some of the Bot Checks. If you've got a slow computer you could
# try changing these to higher values to get some performance back.
# NOTE: This seriously affects the Bots Perception. If you have a
# fast computer you might try lowering them to get better even
# better playing results
pb_timer_sound 0.5
pb_timer_pickup 0.3
pb_timer_grenade 0.5
# Set this to 0 to disallow Bot Logo Spraying
pb_spray 0
# Set this to 1 to switch on the Free For All mode
# (The bots will also kill their teammates)
pb_ffa 0
# This Variable specifies if Bots are allowed to shoot through Walls
# if they saw an enemy or if they heard someone on the other Side of
# a Wall (additional Settings are specified in "botskill.cfg")
pb_shootthruwalls 1
# passwordkey - need set as setinfo to get access to main podbot menu
# usage (in below example You may need to write Your-own passwordkey instead
# _pbadminpw - if You changed the default setting for it):
# setinfo _pbadminpw "your_password"
pb_passwordkey "*******"
# Set the password to have access to podbot menu on DS by 'pb menu'
# console command typed in client's admin PC or called from the binded key.
# Example of bind on Your client PC:
# bind "=" "pb menu"
pb_password "******"
# This value sets the maximum number of Bots to follow a user
pb_numfollowuser 5
# Remove the Comments on the Line below to add Bots that have at least
# a Skill You want
pb_minbotskill 50
# Remove the Comments on the Line below to limit Bots to the specified skill
pb_maxbotskill 80
# This value sets the maximum number of weapons Bots are allowed to
# pickup during one round
pb_maxweaponpickup 10
# Set the below value to delay bots re-join after new map start
pb_mapstartbotdelay 10
# Set the below value to 1 to enable auto kill bots if all human players
# are dead already (default is 0)
pb_autokill 0
# Set the below value to to delay (in seconds) autokill bots if
# autokill is enabled - above (default is 45s)
pb_autokilldelay 45
# Remove the Comments on the Line below to turn on Jason Mode !
# pb_jasonmode 1
# Set the below option to 0 to turn off the Skilldisplay and
# the [POD] before the name
pb_detailnames 0
# The setting below specifies the danger factor with which the bots
# will weighten any waypoint where they have been killed in the past,
# in order to avoid it later. The higher the value, the more the bot
# will care about these waypoints and pick other routes instead.
# Progression is logarithmic. Warning: higher values require more CPU.
pb_dangerfactor 400
# Switches to on/off Botchatting
pb_chat 1
# Switches to on/off radio command usage and reacting for bots
# (switching it off will affect - for example - they will not follow
# the user !!!)
pb_radio 1
# pb_aim_type 1-4 (default 4)
# 1 = inhuman turns
# 2 = constant angle velocity
# 3 = botaim1
# 4 = botaim2
pb_aim_type 4
# The line below binds the User Menu to the "=" key. Of course you
# can bind this to any key you like.
bind "=" "pb menu"
# VERTICAL (up/down) spring stiffness of the aiming system. This value affects
# the quickness of the crosshair movement, as well as the frequency of
# the resulting oscillations.(default: 13.0)
pb_aim_spring_stiffness_x 13.0
# HORIZONTAL (left/right) spring stiffness of the aiming system. This value
# affects the quickness of the crosshair movement, as well as the frequency of
# the resulting oscillations. (default: 13.0)
pb_aim_spring_stiffness_y 13.0
# VERTICAL (up/down) damping coefficient of the aiming system. This value also
# affects the quickness of the crosshair movement, and the amplitude of
# the resulting oscillations.(default: 0.22)
pb_aim_damper_coefficient_x 0.22
# HORIZONTAL (left/right) damping coefficient of the aiming system. This value
# also affects the quickness of the crosshair movement, and the amplitude of
# the resulting oscillations.(default: 0.22)
pb_aim_damper_coefficient_y 0.22
# VERTICAL (up/down) error margin of the aiming system. This value affects how
# far (in game length units) the bot will allow its crosshair to derivate from
# the ideal direction when not targeting any player in particular.
# (default: 2.0)
pb_aim_deviation_x 2.0
# HORIZONTAL (left/right) error margin of the aiming system. This value affects
# how far (in game length units) the bot will allow its crosshair to derivate
# from the ideal direction when not targeting any player in particular.
# (default: 1.0)
pb_aim_deviation_y 1.0
# Perpendicular influence of the vertical axis on a HORIZONTAL movement. This
# value affects how much (in fraction of 1) the bot will be disturbed when
# moving its crosshair on an axis by the inherent movement on the other axis.
# (default: 0.25)
pb_aim_influence_x_on_y 0.25
# Perpendicular influence of the horizontal axis on a VERTICAL movement. This
# value affects how much (in fraction of 1) the bot will be disturbed when
# moving its crosshair on an axis by the inherent movement on the other axis.
# (default: 0.17)
pb_aim_influence_y_on_x 0.17
# Maximal value in seconds after which the aiming system will re-evaluate its
# ideal direction. This affects how often a bot will attempt to correct an
# imprecise crosshair placement by moving the crosshair inside the error
# margin bounds defined by the botaim_deviation CVARs.(default: 1.2)
pb_aim_offset_delay 1.2
# Fraction of the full speed the aiming system will adopt as speed when aiming
# at nothing in particular. This affects how slow the bot will move its
# crosshair when targeting nobody, relatively to its full speed capacity.
# (default: 0.5)
pb_aim_notarget_slowdown_ratio 0.5
# Fraction of the estimated target's velocity the aiming system will rely on
# when aiming at a moving target. This affects how well the bot will be able
# to track moving targets on the fly, and whether it will have a tendancy
# to aim ahead of it or behind it. (default: 2.2)
pb_aim_target_anticipation_ratio 2.2
# Weapons, equipment and ammo restriction (for buying)
# bit numbers meaning - the left one is the 0 in that string cvar
# Pistols restriction
# 0 - KNIFE
# 1 - USP
# 2 - GLOCK18
# 3 - DEAGLE
# 4 - P228
# 5 - ELITE
# 6 - FIVESEVEN
# Shotgun restrictions
# 7 - M3
# 8 - XM1014
# SMG restrictions
# 9 - MP5NAVY
# 10 - TMP
# 11 - P90
# 12 - MAC10
# 13 - UMP45
# Rifles restrictions
# 14 - AK47
# 15 - SG552
# 16 - M4A1
# 17 - GALIL
# 18 - FAMAS
# 19 - AUG
# 20 - SCOUT
# 21 - AWP
# 22 - G3SG1
# 23 - SG550
# Machine Gun restriction
# 24 - M249
# Shield restriction
# 25 - SHIELD
pb_restrweapons "00000000000000000000000000"
# 0 - vest
# 1 - vest and helmet
# 2 - flashbang
# 3 - he grenade
# 4 - smoke grenade
# 5 - defuser
# 6 - night vision googles
# 7 - primary ammo
# 8 - secondary ammo
pb_restrequipammo "000000000"
# Remove the comments on the lines below to have Bots
# join automatically if you start a new map
pb fillserver 100
And here the AMX Plugins file:
Code:
; AMX Mod X plugins
; Admin Base - Always one has to be activated
; admin.amxx ; admin base (requ; AMX Mod X plugins
; Admin Base - Always one has to be activated
; admin.amxx ; admin base (required for any admin-related)
; admin_sql.amxx ; admin base - SQL version (comment admin.amxx)
amxbans.amxx
admin_amxbans.amxx
; Basic
admincmd.amxx ; basic admin console commands
adminhelp.amxx ; help command for admin console commands
adminslots.amxx ; slot reservation
multilingual.amxx ; Multi-Lingual management
; Menus
menufront.amxx ; front-end for admin menus
cmdmenu.amxx ; command menu (speech, settings)
plmenu.amxx ; players menu (kick, ban, client cmds.)
;telemenu.amxx ; teleport menu (Fun Module required!)
mapsmenu.amxx ; maps menu (vote, changelevel)
; Chat / Messages
adminchat.amxx ; console chat commands
antiflood.amxx ; prevent clients from chat-flooding the server
scrollmsg.amxx ; displays a scrolling message
imessage.amxx ; displays information messages
adminvote.amxx ; vote commands
; Map related
nextmap.amxx ; displays next map in mapcycle
; mapchooser.amxx ; allows to vote for next map
timeleft.amxx ; displays time left on map
; Configuration
pausecfg.amxx ; allows to pause and unpause some plugins
statscfg.amxx ; allows to manage stats plugins via menu and commands
; Enable to use AMX Mod plugins
amxmod_compat.amxx ; AMX Mod backwards compatibility layer
loadingsound.amxx
gungame.amxx
gungame_sql.amxx
stats_logging.amxx
statsx.amxx
serverredirect.amxx
deagsmapmanage230b.amxx
; Custom - Add 3rd party plugins here
The Server is a INTEL Quad Core with 4 GB Ram, i think it's not a hardware problem
I run Metamod 1.19p32